文章由上海程斯智能科技有限公司提供技术咨询和服务

硅凝胶针入度试验仪 （Silicon Gel Penetration Tester

执行标准：

YY/T 0647-2021/ISO 14607:2018《乳房植入物的专用要求无源外科植入物》

Execution Standards:

YY/T 0647-2021/ISO 14607: 2018 "Special Requirements for Breast Implants - Passive Surgical Implants"

技术参数：

控制系统：PLC;

展开剩余88%

操作界面：彩色7寸触摸屏，中英文切换

传感器：0~50.0mm （可选择其他量程）

标准针：（2.50±0.05）g 50mm

时间设定：（0 ~60）s

外形尺寸：500mm×600mm×550mm（L×W×H）

重量：25kg

电源：AC220V 50Hz 550W,

Technical Parameters:

Control system: PLC;

Operation interface: 7-inch color touch screen, switching between Chinese and English

Sensor: 0~50.0mm (other ranges can be selected)

Standard needle: (2.50 ± 0.05) g 50mm

Time setting: （0 ~60）s

Dimensions: 500mm × 600mm × 550mm (L × W × H)

Weight: 25kg

Power Supply: AC220V 50Hz 550W,

原理：

‌硅凝胶针入度试验仪的原理‌是通过模拟硅凝胶在特定条件下的吸水膨胀行为，来评估其吸附能力和性能指标。该仪器主要用于测量硅凝胶吸收一定量水后所达到的最大高度，即‌锥入度‌或‌垂直吸水高度‌。

Principle:

The principle of the silicon gel penetration tester is to evaluate its adsorption capacity and performance indicators by simulating the water absorption and expansion behavior of the silicon gel under specific conditions. The instrument is mainly used to measure the maximum height of silicon gel after absorbing a certain amount of water, namely, cone penetration or vertical water absorption height.

应用领域：

‌石油化工‌：用于检测硅凝胶的物理性能，如锥入度、粘度等，适用于石油化工领域的研发和生产‌。

‌医药行业‌：用于医用植入物和药物控释系统的检测，评估其生物相容性和化学稳定性‌。

‌电子行业‌：用于封装和保护电子元器件，检测其电绝缘性能和热导性能‌。

‌汽车行业‌：用于密封和粘合材料，检测其耐温性和耐油性‌。

‌建筑行业‌：用于密封材料和防水涂料，检测其耐候性和附着力‌。

‌航空航天‌：用于轻质结构材料和隔热材料，检测其耐高温和耐辐射性能‌。

‌食品工业‌：可用于食品原料的针入度检验，如乳酪、糖胶、牛油等‌。

Application Areas:

Petrochemical industry: it is used to test the physical properties of silicon gel, such as cone penetration, viscosity, etc. It is suitable for research, development and production in the petrochemical industry.

Pharmaceutical industry: used for testing medical implants and drug controlled release systems, evaluating their biocompatibility and chemical stability.

Electronics industry: used for packaging and protecting electronic components, testing their electrical insulation and thermal conductivity properties.

Automotive industry: used for sealing and bonding materials, testing their temperature resistance and oil resistance.

Construction industry: used for sealing materials and waterproof coatings, testing their weather resistance and adhesion.

Aerospace: Used for lightweight structural materials and insulation materials, testing their high temperature resistance and radiation resistance performance.

Food industry: can be used for needle penetration testing of food raw materials, such as cheese, sugar gum, butter, etc.

配置清单：

主机 一台

电源线 一根

产品合格证 一张

产品使用说明书 一份

产品画册 一份

Configuration List:

One host

One power cord

One product qualification certificate

One copy of the product user manual

One product brochure

概述：

针入度试验是对乳房植人物所用凝胶牢固度的定量测定

Summary:

Penetration test is a quantitative measurement of the firmness of gel used for breast implants

设备特点：

1）采用7寸触摸屏，中英文显示。

2）PLC控制，通讯读取传感器数据，避免了电子元件的读数误差

3）配有嵌入式热敏打印机，方便直接打印测试结果，同时还配备了USB口方便测试结果数据导出，设备存储不低于1000条实验结果

4）采用高精度传感器大大提高了仪器的测试精度和稳定性。

Equipment Features:

1) Equipped with a 7-inch touch screen, displaying in both Chinese and English.

2) PLC control, communication to read sensor data, avoiding reading errors of electronic components

3) Equipped with an embedded thermal printer for easy direct printing of test results, and also equipped with a USB port for easy export of test result data. The device stores no less than 1000 experimental results

4) The use of high-precision sensors greatly improves the testing accuracy and stability of the instrument.

发布于：上海市